﻿---
title: License and preferences
description: The plugin's preferences in Blender, the license status, the trial and its limit, activating and deactivating a license key, the mesh check setting, and the Documentation and Copy Support Info buttons.
url: https://help.tangerina.io/deformable/v0.2.0/user-guides/blender/license-and-preferences/
---

# License and preferences – Blender Plugin – Deformable v0.2.0

The plugin keeps its settings in Blender's preferences. There you see the state of your trial or license, activate
a license key, turn the mesh check on or off, open this guide, and copy what a support email needs.

To open them, choose **Edit > Preferences > Add-ons** and expand **Deformable**.

## License status

The top of the plugin preferences holds a **License** box. Its first line is the status:

| Status | What it means |
|---|---|
| **Standard trial: 7 days left** | The trial runs. The number counts down each day, to **Standard trial: 1 day left**. The next line shows **Trial limit: 2,500 tetrahedrons**. |
| **Standard trial ended — Buy license** | The 7 days are over. The tools stop until you activate a license. |
| **No Standard trial on this device — Buy license** | This computer gives no device id, so it cannot have a trial. A license works. |
| **Standard license** | A Standard license key is active on this computer. There is no limit. |
| **Go online once to start the Standard trial** | The trial has not started yet. Connect to the internet and click **Check Now**. |
| **Go online once to renew the Standard license** | The license went about 7 days without a renewal. Connect to the internet and click **Check Now**. |
| **The clock is behind: set the correct time** | The computer's clock was set back. Correct it. |

Below the status, the box shows:

- **Online access is off in Blender's preferences (System > Network)** while Blender's **Allow Online Access** is
  off. The plugin then contacts nothing: **Activate**, **Deactivate** and **Check Now** are greyed out, the trial
  cannot start, and a license runs only as long as it runs offline. Turn **Allow Online Access** on in
  **Edit > Preferences > System > Network** to use them.

- **Contacting the licensing service…** while the plugin starts the trial, renews, activates or deactivates. When
  that fails, the box shows why, such as **This license key does not exist**.
  [Status messages](https://help.tangerina.io/deformable/v0.2.0/licensing/#status-messages) lists every message and what to do.
- The **License Key** field and **Activate** when no key is active, or **Deactivate** when one is.
- **Check Now** while the status asks you to go online. It contacts our licensing service right away: it starts the
  trial or renews the license.
- **Buy license** while no key is active. It opens the pricing on
  [tangerina.io/deformable](https://tangerina.io/deformable#pricing).

The trial and the license belong to the computer, not to the plugin: the Maya plugin and the C, Rust and Python SDKs
on the same computer share them. A license activated in the Maya plugin or from an SDK shows **Standard license** here
too. A Developer license key does not work in the plugin: **Activate** refuses it with **Developer licenses work in the
SDKs only: the plugins need a Standard license**. The plans, prices and the buying steps are on
[Licensing](https://help.tangerina.io/deformable/v0.2.0/licensing/).

## The trial

The trial starts the first time Deformable runs on the computer, in a plugin or in an SDK. The computer must be
online that one time, with Blender's **Allow Online Access** on: the plugin asks our licensing service to start the
trial when Blender loads it. After that, the trial also works offline.

During the trial, every feature works, and a Deformable Scene can hold up to 2,500 tetrahedrons. Every object in
it counts, floors included, but an object with **Disabled** on: it takes no part in the simulation.
The status bar shows how many the active object and its scene hold, disabled objects included, such as
**Deformable: Sphere: 212 tetrahedrons; scene total 218**.

A bigger Deformable Scene says so in the status bar, at the start frame and when you play, such as
**Deformable: Trial limit: the scene simulates 3,120 tetrahedrons; the trial allows 2,500**. It also shows as soon as a
create action makes the scene too big. When you play, the objects that do not fit stay still and the rest of the
scene runs. Each Deformable Object node that does not fit shows the limit, such as **Trial limit: this
would simulate 3,120 tetrahedrons; the trial allows 2,500**. To simulate the whole scene, use fewer tetrahedrons, for
example with a lower **Target Face Count** on the Autocage panel or a simpler cage, or buy a license. See
[Use fewer tetrahedrons](https://help.tangerina.io/deformable/v0.2.0/user-guides/engine/preparing-meshes/#use-fewer-tetrahedrons).

On day 8, the status shows **Standard trial ended — Buy license**, and the tools and the simulation stop. A scene that
plays shows the same message. Reinstalling the plugin does not restart the trial: the start is kept in your user folder,
outside the plugin, which a reinstall leaves alone.

## Buy a license

Click **Buy license** in the plugin preferences. Your browser opens the pricing on
[tangerina.io/deformable](https://tangerina.io/deformable#pricing). Click **Buy license** there to open the payment
page. After you pay, you get your license key by email.

The Standard license is $99 one time (USD), with no subscription. It is perpetual, covers all future versions (every
update is included), covers the Blender and Maya plugins and the C, Rust and Python SDKs, and includes email
support at [support@tangerina.io](mailto:support@tangerina.io).

## Activate a license

1. Open **Edit > Preferences > Add-ons** and expand **Deformable**.
2. Paste your license key into the **License Key** field.
3. Make sure the computer is online, and click **Activate**.

The box shows **Contacting the licensing service…**, then **Standard license**, and the tetrahedron limit is gone. The
plugin clears the field: the engine keeps the key. Activation needs internet one time. If it fails, the box shows why,
such as **This license is active on another device: deactivate it there or remove that device in the license portal**.

After that, the plugin works offline between renewals. While you use it on a computer that is online, it renews the
license quietly, a few times a day at most, and checks each time Blender starts. Each renewal lets it run about 7 days
offline. When it was not used for longer than that, the first tool or simulation step renews the license first. After
about 7 days offline, it shows **Go online once to renew the Standard license** and the tools stop until you connect and
click **Check Now**.

## Deactivate a license

A Standard license is 1 seat: one computer. A second computer needs the license moved to it, or a second license. To
move it to another computer, deactivate it on this one first:

1. Open the plugin preferences.
2. Make sure the computer is online, and click **Deactivate**.
3. On the new computer, install the plugin, then [activate](https://help.tangerina.io/deformable/v0.2.0/user-guides/blender/license-and-preferences/#activate-a-license)
   the same key.

![The same license key moving from the old computer, where it is deactivated first, to the new computer, where it is activated.](https://help.tangerina.io/deformable/v0.2.0/images/license-move-to-new-computer.svg)

Deactivating here also deactivates the Maya plugin and the SDKs on this computer. Offline, the plugin keeps the
license and shows **Go online to deactivate, or remove this device in the license portal**.

If you no longer have the old computer, remove it in the license portal instead. The link is in the FAQ at
[tangerina.io/deformable](https://tangerina.io/deformable#faq). Lost keys and refunds are on
[Licensing](https://help.tangerina.io/deformable/v0.2.0/licensing/).

## Preferences

| Preference | Default | What it does |
|---|---|---|
| Verify Meshes Before Creating Objects | On | Refuse a mesh that is not clean and closed when you create a deformable object. |

With **Verify Meshes Before Creating Objects** on, every create action checks each mesh first, and so does
**Add Surface Mesh to Object** with **Breakable** on. A mesh with problems is refused, and the warning names them, such
as **Not verified: Suzanne: non closed boundary (84), co located vertices (2), non planar (104)**.

Turn it off to create objects from meshes with small problems that do not matter for your shot, such as a model with
separate eyes. The tools may then still fail on the mesh, and the node shows why. To find and fix the problems
instead, see [Verify Mesh](https://help.tangerina.io/deformable/v0.2.0/user-guides/blender/creating-objects/#verify-mesh).

With the preference off, the create actions do not check the object's transform either. An object with a mirrored
or flat transform, such as a negative scale, is then left out of the simulation, and its Deformable Object node shows
**The world matrix is mirrored or flat (determinant ≤ 0)**. See
[Mesh checks before creating](https://help.tangerina.io/deformable/v0.2.0/user-guides/blender/creating-objects/#mesh-checks-before-creating).

## Help

Below the preferences are two buttons:

- **Documentation** opens this user guide in your browser.
- **Copy Support Info** copies the Blender version, the operating system, the plugin and library versions and the
  license status. Paste it into your email to [support@tangerina.io](mailto:support@tangerina.io). The plugin then
  shows **Copied the support info: paste it into your email**.

The pages of this guide also open from the plugin's menus. Hover over an item of **Object > Deformable**, or a button
of the License box, and press **F1**. Or right-click it and choose **Online Manual**.

## Update the plugin

To install a new version, download the `.zip` file for your system from
[tangerina.io/deformable](https://tangerina.io/deformable#download) and install it the same way as the first one: **Edit > Preferences > Get
Extensions > Install from Disk**. Then restart Blender: a running Blender keeps the version it loaded.
