﻿---
title: Materials
description: The Deformable Material, its ten values, and the 43 material presets with their values.
url: https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/materials/
---

# Materials – Engine – Deformable v0.4.0

A material sets how an object behaves: how stiff and heavy it is, whether it dents, and how easily it breaks. Every
deformable object has one, from a **Deformable Material**. An object with no material uses the defaults below.

## Pick a preset

The quickest way is a preset. **Assign Material Preset** gives the selected deformable objects or material regions a
preset, such as **rubber** or **glass**, which fills the ten values. When you then edit a value, the material's
**Preset** turns back to **Custom**, and your values stay.

**Assign Material from Active** copies one object's material, the preset and all ten values, to the other selected
objects.

You can keyframe every value while the simulation plays: the objects take the new values as they move. A change to
which material an object takes applies only from the start frame: return to it and play again. See
[What you can animate](https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/simulation-settings/#what-you-can-animate).

**See it in:** [Blender](https://help.tangerina.io/deformable/v0.4.0/user-guides/blender/creating-objects/#assign-a-material) · [Maya](https://help.tangerina.io/deformable/v0.4.0/user-guides/maya/creating-objects/#assign-a-material) · [C](https://help.tangerina.io/deformable/v0.4.0/user-guides/c/scene/#use-a-preset) · [Rust](https://help.tangerina.io/deformable/v0.4.0/user-guides/rust/scene/#use-a-preset) · [Python](https://help.tangerina.io/deformable/v0.4.0/user-guides/python/scene/#materials)

## The ten values

| Value | Default | Range | What it does |
|---|---|---|---|
| Young's Modulus | 800,000 | 1,000 to 10,000,000,000 | Stiffness, in pascals. Low values bend like rubber, high values stay rigid like stone. |
| Poisson's Ratio | 0 | −0.9 to 0.49 | How much the material keeps its volume. Near 0.49, it bulges sideways when you squash it, like jelly. |
| Density | 2,500 | 0 to 10,000 | Mass per volume, in kilograms per cubic metre. Values above 10,000 count as 10,000. |
| Toughness | 200,000 | 0 to 100,000,000 | Resistance to fracture. Low values break easily. 0 never breaks. |
| Young's Damping | 0 | 0 to 1,000,000,000 | Damping that grows with stiffness. It calms wobble and jiggle. |
| Yield Strain | 0 | 0 to 1 | How far the material stretches before it dents for good. |
| Maximum Yield | 0 | 0 to 1 | The most permanent stretch the material can keep. 0 turns denting off. |
| Creep Fraction | 0 | 0 to 1 | How fast a dent forms: once the stretch passes Yield Strain, the share of it that becomes permanent at each step. 0 turns denting off. |
| Wake Up Radius | 1.2 | 1 to 1,000 | How far an impact reaches to wake sleeping parts, in simulation units. |
| Friction | 0.6 | 0 to 1 | How much the surface grips. Where two objects touch, the lower friction of the two applies. |

The default is a stiff, breakable material.

**See it in:** [Blender](https://help.tangerina.io/deformable/v0.4.0/user-guides/blender/how-the-plugin-works/#where-the-settings-are) · [Maya](https://help.tangerina.io/deformable/v0.4.0/user-guides/maya/how-the-plugin-works/#the-attribute-editor) · [C](https://help.tangerina.io/deformable/v0.4.0/user-guides/c/scene/#material-values) · [Rust](https://help.tangerina.io/deformable/v0.4.0/user-guides/rust/scene/#material-values) · [Python](https://help.tangerina.io/deformable/v0.4.0/user-guides/python/scene/#materials)

### Elastic, plastic and breakable

- **Elastic.** The object springs back to its shape. This is the default.
- **Plastic.** The object keeps a dent or a bend. Set **Maximum Yield** and **Creep Fraction** above 0, and
  **Yield Strain** to how far it stretches before it dents; at 0 it dents from any stretch. Presets such as
  **plastic**, **sheet_metal** and **iron** do this.
- **Breakable.** The object cracks where the stress is too high. **Toughness** sets how high. Set it to 0 for an
  object that never breaks. A material can be both plastic and breakable.

![The same bar pressed in the middle: the elastic bar springs back straight, the plastic bar keeps a bend, and the breakable bar cracks in two.](https://help.tangerina.io/deformable/v0.4.0/images/materials-elastic-plastic-breakable.svg)

To keep a breakable material but stop one object from cracking its surface open, see
[Make Breakable and Make Unbreakable](https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/fracture-and-splinters/#make-breakable-and-make-unbreakable).

### Units

Material values are in simulation units, where a unit reads as a metre and gravity is 9.81. The **Scale** of the
Deformable Scene converts scene units to simulation units, and it does not change material values. Set Scale to match
your scene's unit, and a brick behaves like a brick. See
[Scale](https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/simulation-settings/#scale).

### Sleep

Objects that come to rest on a support go to sleep. A sleeping object costs almost nothing, and an impact wakes it.
**Wake Up Radius** sets how far around an impact the material wakes. To keep an object awake at all times, turn on
**Never Sleep** on the object. See [Sleep](https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/simulation-settings/#sleep).

## Parts with their own material

A material region gives the part of an object inside a convex mesh its own material, for example a steel core in a
concrete pillar. See [Material regions](https://help.tangerina.io/deformable/v0.4.0/user-guides/engine/kinematic-and-regions/#material-regions).

**See it in:** [Blender](https://help.tangerina.io/deformable/v0.4.0/user-guides/blender/creating-objects/#regions) · [Maya](https://help.tangerina.io/deformable/v0.4.0/user-guides/maya/creating-objects/#regions) · [C](https://help.tangerina.io/deformable/v0.4.0/user-guides/c/scene/#give-part-of-an-object-another-material) · [Rust](https://help.tangerina.io/deformable/v0.4.0/user-guides/rust/scene/#material-regions) · [Python](https://help.tangerina.io/deformable/v0.4.0/user-guides/python/scene/#material-regions)

## The presets

The plugins and the SDKs have the same 43 presets, and the plugins' menus list them in this order. The values of each
preset are chosen for its material and checked by dropping a cube onto a floor and by loading a beam held at one end. A
preset shatters at a touch, breaks from a fall, or survives both; the same checks show whether it bounces or keeps a
dent, and how far it sags.

Every preset has a Wake Up Radius of 1.2 and a Young's Damping of 0, except **jelly**, which has a Young's Damping
of 500. A preset whose name starts with `unbreakable_` is its namesake with Toughness 0. In the Plastic column,
"Yes, past 0.02" means the material dents once it stretches past a Yield Strain of 0.02, and "Yes, from any stretch"
that its Yield Strain is 0.

### Soft solids

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| sponge | 12,000 | 0.1 | 40 | 0, never breaks | No | 0.8 |
| foam | 13,000 | 0.2 | 60 | 400 | Yes, past 0.02 | 0.8 |
| snow | 100,000 | 0.2 | 300 | 0, never breaks | Yes, past 0.005 | 0.3 |
| jelly | 60,000 | 0.48 | 1,030 | 0, never breaks | No | 0.3 |
| rubber | 970,000 | 0 | 2,100 | 22,000 | No | 1 |
| unbreakable_rubber | 970,000 | 0 | 2,100 | 0, never breaks | No | 1 |
| hard_rubber | 9,400,000 | −0.21 | 970 | 150,000 | No | 0.56 |

### Living and wooden

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| flesh | 20,000 | 0 | 240 | 1,700 | Yes, from any stretch | 0.56 |
| bone | 65,000,000 | 0.3 | 1,900 | 40,000 | No | 0.5 |
| plant | 970,000 | 0 | 920 | 4,300 | No | 0.62 |
| straw | 60,000 | 0.3 | 120 | 0, never breaks | Yes, past 0.05 | 0.5 |
| cork | 6,000,000 | 0 | 240 | 0, never breaks | No | 0.6 |
| tree | 9,900,000 | 0 | 930 | 25,000 | No | 0.9 |
| wood | 5,300,000 | 0 | 970 | 28,000 | No | 0.91 |
| plywood | 3,700,000 | 0 | 970 | 18,000 | Yes, past 0.14 | 0.76 |
| cardboard | 590,000 | 0 | 160 | 2,000 | Yes, past 0.064 | 1 |

### Building materials and stone

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| drywall | 7,800,000 | 0.34 | 770 | 17,000 | Yes, past 0.3 | 0.53 |
| plaster | 7,900,000 | 0.31 | 1,200 | 17,000 | Yes, past 0.13 | 0.48 |
| asphalt | 3,500,000 | 0.19 | 1,000 | 35,000 | Yes, past 0.071 | 1 |
| clay | 32,000,000 | 0.35 | 960 | 11,000 | No | 0.63 |
| brick | 3,100,000 | 0 | 970 | 2,900 | No | 1 |
| concrete | 120,000,000 | 0 | 3,300 | 30,000 | No | 1 |
| reinforced_concrete | 120,000,000 | 0 | 3,300 | 39,000 | No | 1 |
| sandstone | 87,000,000 | 0.00095 | 2,900 | 40,000 | No | 0.68 |
| stone | 96,000,000 | 0.00097 | 4,200 | 39,000 | No | 0.77 |
| granite | 54,000,000 | 0.17 | 1,300 | 210,000 | No | 0.9 |

### Glass and ceramics

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| glass | 94,000,000 | 0 | 2,100 | 1,400 | No | 0.61 |
| safety_glass | 95,000,000 | 0 | 2,100 | 19,000 | Yes, past 0.083 | 0.54 |
| ceramic | 87,000,000 | 0.00097 | 3,800 | 42,000 | No | 0.7 |
| diamond | 970,000,000 | 0.097 | 3,300 | 0, never breaks | No | 1 |

### Plastics and carbon

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| plastic | 8,300,000 | 0.2 | 1,200 | 49,000 | Yes, past 0.33 | 0.66 |
| rigid_foam | 9,000,000 | 0.3 | 40 | 0, never breaks | No | 0.6 |
| carbon_fiber | 14,000,000 | 0.3 | 1,600 | 50,000 | No | 0.5 |
| graphite | 45,000,000 | 0 | 2,400 | 2,600 | No | 1 |

### Metals

| Preset | Young's Modulus | Poisson's Ratio | Density | Toughness | Plastic | Friction |
|---|---|---|---|---|---|---|
| wire | 32,000,000 | 0.31 | 920 | 0, never breaks | No | 0.63 |
| stiff_wire | 93,000,000 | 0.34 | 970 | 0, never breaks | Yes, past 0.028 | 1 |
| steel | 120,000,000 | 0.23 | 3,700 | 0, never breaks | Yes, past 0.033 | 0.63 |
| sheet_metal | 7,400,000 | 0.18 | 1,000 | 89,000 | Yes, past 0.21 | 0.76 |
| foil | 24,000,000 | 0.26 | 210 | 0, never breaks | Yes, past 0.032 | 0.56 |
| rebar | 10,000,000 | 0.32 | 970 | 250,000 | Yes, past 0.093 | 0.56 |
| unbreakable_rebar | 10,000,000 | 0.32 | 970 | 0, never breaks | Yes, past 0.093 | 0.56 |
| lead | 17,000,000 | 0.47 | 10,000 | 120,000 | Yes, past 0.14 | 1 |
| iron | 10,000,000 | 0.28 | 7,300 | 150,000 | Yes, past 0.056 | 1 |

**See it in:** [Blender](https://help.tangerina.io/deformable/v0.4.0/user-guides/blender/creating-objects/#assign-a-material) · [Maya](https://help.tangerina.io/deformable/v0.4.0/user-guides/maya/creating-objects/#assign-a-material) · [C](https://help.tangerina.io/deformable/v0.4.0/user-guides/c/scene/#use-a-preset) · [Rust](https://help.tangerina.io/deformable/v0.4.0/user-guides/rust/scene/#use-a-preset) · [Python](https://help.tangerina.io/deformable/v0.4.0/user-guides/python/scene/#materials)
